Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE
Power Window
- When removing power windows-related components, refer to cautions in the glass/windows/mirrors information. Ref. to GLASS/WINDOWS/MIRRORS>GENERAL DESCRIPTION>CAUTION .
- Be careful not to lose the power supply to the power window motor by removing and installing the battery terminal or the regulator & motor assembly connector for each seat, etc. while the power window (of the driver's, passenger's, rear right or rear left seat) is operating. If it is lost by mistake, perform the initial setting of the power window. Ref. to POWER WINDOW(DIAGNOSTICS) >WORK SUPPORT>OPERATION > SYSTEM INITIALIZATION .
- Perform the initial setting of the power window whenever the regulator & motor assembly, the glass assembly or running channel (of the driver's, passenger's, rear right or rear left seat) is removed/installed/replaced. Ref. to POWER WINDOW(DIAGNOSTICS) >WORK SUPPORT>OPERATION > SYSTEM INITIALIZATION .
- Otherwise, the glass location is not recognized, resulting that the automatic operation function, window auto-reverse, window drawing foreign matter prevention, or off-delay function may not operate properly.
- If a DTC is displayed on the Subaru Select Monitor, do not clear the memory before the diagnosis for the DTC is performed. Otherwise, DTC may not be referred to and improper diagnosis may result. Perform the diagnosis for DTCs, and repair or replace the cause of trouble before clearing the memory.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.