Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Subaru Legacy BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2.37 OZS. | 0.07 L | ND-OIL12 | S | |||
| Air Cond Refrigerant | 1.00 LBS. | 0.45 KG | HFO-1234yf | S | |||
| Automatic Transmission Fluid | 2.5L Eng | 11.90 QTS. | 11.26 L | S | |||
| Brake Fluid | N/A | N/A | FMVSS No. 116 DOT 3 or DOT 4 Brake Fluid | S | |||
| Differential Gear Oil | Front | 1.30 QTS. | 1.23 L | API - GL-5, SAE 75W-90 gear oil | The vehicle is filled at the factory with this type of differential gear oil: SUBARU Extra MT | S | |
| Differential Gear Oil | Rear | 0.80 QTS. | 0.75 L | API - GL-5, SAE 75W-90 gear oil | S | ||
| Engine Coolant | 2.5L Eng | 9.50 QTS. | 8.99 L | SUBARU Super Coolant | S | ||
| Engine Oil | 2.5L Eng | 4.40 QTS. | 4.16 L | ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil | If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. | S | |
| Manual Transmission Fluid | 3.50 QTS. | 3.31 L | SUBARU Extra MT | The indicated oil/fluid quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors. After refilling with oil/fluid, the oil/fluid level should be checked. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.