SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIRBAG SYSTEMAIRBAG CONNECTORPROCEDUREDRIVER'S AIRBAG MODULE AND CURTAIN AIRBAG MODULE
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Driver's Airbag Module And Curtain Airbag Module

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Driver's Airbag Module And Curtain Airbag Module
  1. How to disconnect:
    1. Using a flat tip screwdriver, pry the push lock upward to unlock.
    2. Pull the connector to disconnect from the airbag module assembly or the retractor assembly.
      G10270442Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION:
    • Be sure to insert the connector in until it is locked. 
    • Press in the push lock securely. Then pull it gently to make sure that it is locked. 
    G10270443Courtesy of SUBARU OF AMERICA, INC.

    Connect the connector in the reverse order of disconnecting. At this time, be sure to insert until a clicking sound is heard.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.