SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIRBAG SYSTEMAIRBAG CONNECTORPROCEDUREDRIVER'S AIRBAG MODULE (STEERING ROLL CONNECTOR)
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Driver's Airbag Module (Steering Roll Connector)

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Driver's Airbag Module (Steering Roll Connector)
  1. How to disconnect:
    CAUTION:

    When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness. 

    1. Pull the slide lock (a) in the direction of arrow.
    2. With the slide lock pulled, disconnect the connector.
      G10270438Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION:

    Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked. 

    Holding the connector, push it in securely until a clicking sound is heard.

    G10270439Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.