2022 Subaru Forester BaseFACTORY OEM SERVICE PROCEDURE

Inspection Mode X

DTC Description & trouble part Condition Number of driving cycles on the detecting condition
P2004 TGV CONTROL STUCK OPEN BANK 1 - 1
P2005 TGV CONTROL STUCK OPEN BANK 2 - 1
P2006 TGV CONTROL STUCK CLOSED BANK 1 - 1
P2007 TGV CONTROL STUCK CLOSED BANK 2 - 1
NOTE: Perform the inspection mode after warming up the engine except that the engine coolant temperature at engine start is specified.
  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4-8.8 Imp gal)].
  2. Using the Subaru Select Monitor, perform the clear memory of [Engine Control System]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
  3. Start the engine.
  4. Shift the select lever to "P" range, and let the engine race for 10 seconds or more.
    NOTE: Keep Engine speed at 3500 rpm or more.
  5. Read the pending code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.