2022 Subaru Forester BaseFACTORY OEM SERVICE PROCEDURE

Electrical Specification

G13228410Courtesy of SUBARU OF AMERICA, INC.
NOTE:
  • Terminal numbers in VDC control module & H/U connector (on the control module side) are shown in the figure.
  • When the connector is removed from the VDC control module & H/U, the brake warning light (EBD warning light), ABS warning light, VDC warning light & VDC operation indicator light and VDC OFF indicator light illuminate.
Terminal No. Contents Measuring condition Standard
(B310) No. 1 ←→ Chassis ground VDC pump motor power supply Always Battery voltage
(B310) No. 2 RH rear brake caliper (+) - -
(B310) No. 3 RH rear brake caliper (-) - -
(B310) No. 5 CAN1-H - -
(B310) No. 7 FL wheel speed sensor GND - -
(B310) No. 8 ←→ Chassis ground Electronic parking brake indicator light Always Battery voltage
(B310) No. 11 CAN2-H (1) - -
(B310) No. 12 LH rear brake caliper (-) - -
(B310) No. 13 LH rear brake caliper (+) - -
(B310) No. 14 Ground - -
(B310) No. 15 Electronic parking brake switch - -
(B310) No. 16 Electronic parking brake switch - -
(B310) No. 19 CAN1-L - -
(B310) No. 20 ←→ Chassis ground Brake booster pressure sensor power supply(2) Ignition switch: ON 4.85 - 5.15 V
(B310) No. 21 FR wheel speed sensor signal - -
(B310) No. 22 RR wheel speed sensor signal - -
(B310) No. 23 RL wheel speed sensor GND - -
(B310) No. 24 FL wheel speed sensor signal - -
(B310) No. 25 CAN2-L (1) - -
(B310) No. 26 FR wheel speed sensor GND - -
(B310) No. 27 ←→ Chassis ground Brake fluid level switch Ignition switch: ON 6 V or more
(B310) No. 28 Brake booster pressure sensor GND(2) - -
(B310) No. 30 ←→ Chassis ground VDC control module power supply Always Battery voltage
(B310) No. 31 Electronic parking brake switch - -
(B310) No. 32 Electronic parking brake switch - -
(B310) No. 33 ←→ Chassis ground Stop light switch output Ignition switch: ON Ignition power supply voltage
(B310) No. 34 VSO PIN output - -
(B310) No. 36 ←→ Chassis ground Ignition power supply Ignition switch: ON Ignition power supply voltage
(B310) No. 37 RR wheel speed sensor GND - -
(B310) No. 38 ←→ Chassis ground Stop light switch Brake pedal operation Brake ON: Battery voltage
Brake OFF: Ground
(B310) No. 39 RL wheel speed sensor signal - -
(B310) No. 41 ←→ Chassis ground VDC OFF switch (model with high grade X mode) VDC OFF switch operation Switch ON: 1 Ξ© or less
Switch OFF: 1 MΞ© or more
(B310) No. 43 ←→ Chassis ground AVH switch AVH switch operation Ignition power supply voltage
(B310) No. 45 Brake booster pressure sensor signal(2) - -
(B310) No. 46 Ground - -
(1) With electric brake booster

(2) Without electric brake booster
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.