Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Subaru BRZ Limited, Automatic TransFACTORY OEM SERVICE PROCEDURE
Check The Cylinder Compression
CAUTION:
- Do not crank for 20 seconds or more.
- In order to perform the test again after performing the active test, return to the active test menu screen, and perform the test again.
- Use a fully charged battery.
- When the active test is performed, DTC P1604 (STARTABILITY MALFUNCTION), etc. may be detected.
- After performing the active test, be sure to check and clear DTC(s). Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.