Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Subaru Ascent BaseFACTORY OEM SERVICE PROCEDURE
D Range Shift Function
- Connect the Subaru Select Monitor.CAUTION: Make sure to route the Subaru Select Monitor wires so that they do not disturb the driving.
- Turn the ignition switch to ON. (Engine ON)
- Display [Vehicle Speed] and [Actual Gear Ratio].
- Make sure that the engine speed is 1, 100 - 1, 300 r/min while driving on the level road at 50 km/h (31 MPH) after accelerating from halting up to 1/4 of accelerator opening angle.
- While the vehicle gradually decelerates from the same condition as in step 4 and finally stops, check that [Actual Gear Ratio] changes smoothly according to [Vehicle Speed].CAUTION: Make sure to get an assistant on the vehicle and have the person read the data.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.