2021 Subaru WRX BaseFACTORY OEM SERVICE PROCEDURE

Valve Spring

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
Free length (reference) mm (in) Standard 43.28 (1.7039)
Tension/spring height N (kgf, lbf)/mm (in) Set Standard 182 - 210

(18.56 - 21.41, 40.92 - 47.22)/


34.50 (1.3583)
Lift Standard 483 - 533

(49.25 - 54.35, 108.60 - 119.84)/


24.80 (0.9764)
Squareness (at height of 30 mm (1.1811 in)) Standard 2.5Β°, 1.4 mm (0.0551 in) or less
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.