Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Subaru WRX BaseFACTORY OEM SERVICE PROCEDURE
Engine Oil
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- TYPE
CAUTION:
- Use 0W-20 (synthetic oil).
- It is acceptable to fill with an engine oil of another brand, but make sure to use the engine oil corresponding to the following standards.
| API standard |
|
| ILSAC standard |
|
| SAE viscosity No. and applicable temperature |
|
- CAPACITY
| Total capacity (at overhaul) | L (US qt, Imp qt) | 5.55 (5.9, 4.9) |
| When replacing engine oil and oil filter | L (US qt, Imp qt) | 4.5 (4.8, 4.0) |
| When replacing engine oil only | L (US qt, Imp qt) | 4.3 (4.5, 3.8) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
