2021 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

Ball Joint: Removal

  1. Remove the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>REMOVAL .
  2. Remove the ball joint COMPL.
    1. Remove the cotter pin (a).
    2. Remove the castle nut (b) and washer (c).
    3. Use a ball joint puller (d) to detach the arm COMPL front (e).
      G13949552Courtesy of SUBARU OF AMERICA, INC.
    4. Remove the bolt and pull out the ball joint COMPL.
      G13949553Courtesy of SUBARU OF AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.