2021 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

Diagnostic Method

WARNING: This page is about a different variant/trim than selected.

Judge as NG if the criteria below are met.

JUDGMENT VALUE - DIAGNOSIS 1

Malfunction Criteria Threshold Value
Throttle minimum stop position 2.22 V or more
JUDGMENT VALUE - DIAGNOSIS 2

Malfunction Criteria Threshold Value
Accelerator pedal position learning value in backup RAM area 1 Not equal to accelerator pedal position learning value in backup RAM area 2
JUDGMENT VALUE - DIAGNOSIS 3

Malfunction Criteria Threshold Value
Total of backup RAM (ECM shutdown) Not equal to total of backup RAM (ECM startup)
JUDGMENT VALUE - DIAGNOSIS 4

Malfunction Criteria Threshold Value
Communication status between main CPU and sub CPU Malfunction
JUDGMENT VALUE - DIAGNOSIS 5

Malfunction Criteria Threshold Value
Throttle control calculation data by main CPU Not equal to throttle control calculation data by sub CPU
JUDGMENT VALUE - DIAGNOSIS 6

Malfunction Criteria Threshold Value
Calculation data by main CPU Not equal to calculation data by FPU
JUDGMENT VALUE - DIAGNOSIS 7

Malfunction Criteria Threshold Value
Actual engine output - Target engine output More than 20 kw (27 PS)

Time needed for diagnosis 

Diagnosis 1, 2, 3, 4 and 5:  Less than 1 s

Diagnosis 6:  200 ms

Diagnosis 7:  500 ms

Malfunction indicator light illumination:  Illuminates as soon as a malfunction occurs.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.