2021 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

Diagnostic Method

Detect a malfunction by measuring the time from fuel cut completed until the rear oxygen sensor voltage begins to rise.

G13954787Courtesy of SUBARU OF AMERICA, INC.

Judge as NG when the following conditions are established.

JUDGMENT VALUE SPECIFICATION SPECIFICATION

Malfunction Criteria Threshold Value
Output voltage value of rear oxygen sensor
Elapsed time
Less than 0.2V
More than value of Map
AVERAGE VALUE OF INTAKE AIR AMOUNT - MAP

Average value of intake air amount
g/s(oz/s))
19.00 (0.67) 20.00 (0.71) 21.00 (0.74) 22.00 (0.78)
Elapsed time (ms) 4580 4480 4000 4000

Time needed for diagnosis:Β  Less than 1 s

Malfunction indicator light illumination:Β  Illuminates when malfunction occurs in 2 continuous driving cycles.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.