2021 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

Oil Pump

Pump type Trochoid type
Number of teeth pcs. Inner rotor 10
Outer rotor 11
Outer rotor diameter x Thickness mm (in) 71.4 x 14 (2.81 x 0.55)
Performance (Oil temperature 120Β°C (248Β°F)) 600 r/min Discharge pressure kPa (kg/cm2 , psi) 34 (0.3, 4.9)
Discharge rate L (US qt, Imp qt)/min. 5.8 (6.1, 5.1) or more
6, 000 r/min Discharge pressure kPa (kg/cm2 , psi) 298 (3.0, 43.2)
Discharge rate L (US qt, Imp qt)/min. 46.6 (49.3, 41.0) or more
Relief valve working pressure (2-step relief) 1st opening pressure kPa (kg/cm2 , psi) 150 (1.5, 21.7)
Main opening pressure kPa (kg/cm2 , psi) 700 (7.1, 101.5)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.