2021 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

CDS Cannot Be Played Back

Probable cause: 

CD malfunction, unit body malfunction

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to COCKPIT CONTROL (DIAGNOSTICS)>General Description>CAUTION .
  1. CONFIRM CD INSERTION CONDITION  .

    Check that the CD is inserted properly.

    Is the check result OK?

    Yes:  Go to  2 .

    No:  Insert the CD properly.

  2. CHECK CD  .

    Check the CD surfaces are free from scratches or dirt.

    Is the check result OK?

    Yes:  Go to  3 .

    No:  The CD is defective.

  3. CHECK CD  .

    Replace the CD with another one. (Use a playable CD. Refer to owner's manual for details.)

    Is the CD played back?

    Yes:  The CD is defective.

    No:  Go to  4 .

  4. CHECK DEW CONDENSATION IN UNIT  .
    1. After starting the engine, turn ON the air conditioner and dry inside the vehicle for 10 minutes or more.
    2. Check the CD operation.

    Is the CD played back?

    Yes:  Dew condensation occurred inside the unit.

    No:  Replace the cockpit control module. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY .

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.