2021 Subaru Legacy BaseFACTORY OEM SERVICE PROCEDURE

LEGACY Sedan Model

LEGACY Sedan Model

Measurement Minimum Preferred Maximum
Left Front Caster (°) 5.98 5.98 5.98
Right Front Caster (°) 5.98 5.98 5.98
Left Front Camber (°) -0.58 -0.08 0.42
Right Front Camber (°) -0.58 -0.08 0.42
Front Toe (°) -0.16 0 0.16
Left SAI (°) 13.17 13.17 13.17
Right SAI (°) 13.17 13.17 13.17
Left Rear Camber (°) -2.25 -1.5 -0.75
Right Rear Camber (°) -2.25 -1.5 -0.75
Rear Toe (°) -0.16 0 0.16
Thrust Angle (°) 0.33 0.33 0.33
Left Toe Out, Inward (°) 0 0 0
Right Toe Out, Inward (°) 0 0 0
Left Toe Out, Outward (°) 0 0 0
Right Toe Out, Outward (°) 0 0 0
Left Max Turn, Inward (°) 36.6 38.1 39.6
Right Max Turn, Inward (°) 36.6 38.1 39.6
Left Max Turn, Outward (°) 31.2 32.7 34.2
Right Max Turn, Outward (°) 31.2 32.7 34.2
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.