2021 Subaru Forester BaseFACTORY OEM SERVICE PROCEDURE

Differential Gear Oil: Replacement

CAUTION: Vehicle components are extremely hot immediately after driving. Be wary of receiving burns from heated parts.
  1. Remove the filler plug.
    G13225607Courtesy of SUBARU OF AMERICA, INC.
  2. Drain the differential gear oil by removing drain plug using TORX® bit T70.
    G13225610Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the iron powder, etc. from the drain plug.
  4. Attach the drain plug using a new gasket, using TORX® bit T70.

    Tightening torque: 

    70 N.m (7.1 kgf-m, 51.6 ft-lb)

  5. Fill the differential gear oil from the filler plug hole.

    Differential gear oil:  Ref. to RECOMMENDED MATERIALS>RECOMMENDED MATERIALS .

    Differential gear oil capacity:  Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>General Description>SPECIFICATION .

  6. Check the differential gear oil level. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>Differential Gear Oil>INSPECTION .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.