2021 Subaru Forester BaseFACTORY OEM SERVICE PROCEDURE

FORESTER All Models

FORESTER All Models

Measurement Minimum Preferred Maximum
Left Front Caster (°) 5.37 5.37 5.37
Right Front Caster (°) 5.37 5.37 5.37
Left Front Camber (°) -0.58 -0.08 0.42
Right Front Camber (°) -0.58 -0.08 0.42
Front Toe (°) -0.16 0 0.16
Left SAI (°) 0 0 0
Right SAI (°) 0 0 0
Left Rear Camber (°) -1.5 -0.75 0
Right Rear Camber (°) -1.5 -0.75 0
Rear Toe (°) 0.08 0.24 0.4
Thrust Angle (°) 0.33 0.33 0.33
Left Toe Out, Inward (°) 0 0 0
Right Toe Out, Inward (°) 0 0 0
Left Toe Out, Outward (°) 0 0 0
Right Toe Out, Outward (°) 0 0 0
Left Max Turn, Inward (°) 38.4 38.4 38.4
Right Max Turn, Inward (°) 38.4 38.4 38.4
Left Max Turn, Outward (°) 33.5 33.5 33.5
Right Max Turn, Outward (°) 33.5 33.5 33.5
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.