2021 Subaru Forester BaseFACTORY OEM SERVICE PROCEDURE

Diagnostics With Phenomenon: List

Symptoms Reference
  1. Driver's side power window does not work.
Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>DRIVER'S SIDE POWER WINDOW DOES NOT WORK .
2. Passenger's side power window does not work. (With off-delay function for driver's seat only) Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>PASSENGER'S SIDE POWER WINDOW DOES NOT WORK. (WITH OFF-DELAY FUNCTION FOR DRIVER'S SEAT ONLY) .
3. Passenger's side power window does not work. (Other than with off-delay function for driver's seat only) Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>PASSENGER'S SIDE POWER WINDOW DOES NOT WORK. (OTHER THAN WITH OFF-DELAY FUNCTION FOR DRIVER'S SEAT ONLY) .
4. Rear left power window does not work. (Without telematics) Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>REAR LEFT POWER WINDOW DOES NOT WORK. (WITHOUT TELEMATICS) .
5. Rear left power window does not work. (With telematics) Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>REAR LEFT POWER WINDOW DOES NOT WORK. (WITH TELEMATICS) .
6. Rear right power window does not work. (Without telematics) Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>REAR RIGHT POWER WINDOW DOES NOT WORK. (WITHOUT TELEMATICS) .
7. Rear right power window does not work. (With telematics) Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>REAR RIGHT POWER WINDOW DOES NOT WORK. (WITH TELEMATICS) .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.