2021 Subaru Forester BaseFACTORY OEM SERVICE PROCEDURE

Main Switch

  1. Measure the resistance between terminals of the switch power window main.

Preparation tool: 

Circuit tester

G12398774Courtesy of SUBARU OF AMERICA, INC.
  • Base grade
  • Driver's seat main
Terminal No. Inspection conditions Standard
14 - 15 OFF Less than 1 Ω
7 - 14
7 - 15
1 MΩ or more
7 - 14 Manual UP Less than 1 Ω
14 - 15
7 - 15
1 MΩ or more
7 - 15 Manual DOWN Less than 1 Ω
14 - 15
7 - 14
1 MΩ or more
  • Passenger's seat remote (window lock OFF)
Terminal No. Inspection conditions Standard
7 - 11
7 - 12
OFF Less than 1 Ω
7 - 10 1 MΩ or more
10 - 11
7 - 12
Manual UP Less than 1 Ω
11 - 12 1 MΩ or more
10 - 12
7 - 11
Manual DOWN Less than 1 Ω
11 - 12 1 MΩ or more
  • Passenger's seat remote (window lock ON)
Terminal No. Inspection conditions Standard
11 - 12 OFF Less than 1 Ω
7 - 10 1 MΩ or more
10 - 11 Manual UP Less than 1 Ω
7 - 12
11 - 12
1 MΩ or more
10 - 12 Manual DOWN Less than 1 Ω
7 - 11
11 - 12
1 MΩ or more
  • Rear seat remote right (window lock OFF)
Terminal No. Inspection conditions Standard
1 - 7
2 - 7
OFF Less than 1 Ω
7 - 10 1 MΩ or more
1 - 10
2 - 7
Manual UP Less than 1 Ω
1 - 2 1 MΩ or more
2 - 10
1 - 7
Manual DOWN Less than 1 Ω
1 - 2 1 MΩ or more
  • Rear seat remote right (window lock ON)
Terminal No. Inspection conditions Standard
1 - 2 OFF Less than 1 Ω
7 - 10 1 MΩ or more
1 - 10 Manual UP Less than 1 Ω
1 - 2
2 - 7
1 MΩ or more
2 - 10 Manual DOWN Less than 1 Ω
1 - 2
1 - 7
1 MΩ or more
  • Rear seat remote left (window lock OFF)
Terminal No. Inspection conditions Standard
9 - 7
8 - 7
OFF Less than 1 Ω
10 - 7 1 MΩ or more
10 - 9
8 - 7
Manual UP Less than 1 Ω
8 - 9 1 MΩ or more
10 - 8
9 - 7
Manual DOWN Less than 1 Ω
8 - 9 1 MΩ or more
  • Rear seat remote left (window lock ON)
Terminal No. Inspection conditions Standard
9 - 8 OFF Less than 1 Ω
10 - 7 1 MΩ or more
10 - 9 Manual UP Less than 1 Ω
8 - 7
9 - 8
1 MΩ or more
10 - 8 Manual DOWN Less than 1 Ω
9 - 8
9 - 7
1 MΩ or more
  • Except for base grade (model without telematics)
  • Driver's seat main
Terminal No. Inspection conditions Standard
11 - 12 OFF Less than 1 Ω
7 - 11
7 - 12
1 MΩ or more
7 - 12 Manual UP Less than 1 Ω
7 - 11
11 - 12
1 MΩ or more
7 - 11 Manual DOWN Less than 1 Ω
7 - 12
11 - 12
1 MΩ or more
  • Rear seat remote right (window lock OFF)
Terminal No. Inspection conditions Standard
1 - 7
2 - 7
OFF Less than 1 Ω
7 - 16 1 MΩ or more
1 - 16
2 - 7
Manual UP Less than 1 Ω
1 - 2 1 MΩ or more
2 - 16
1 - 7
Manual DOWN Less than 1 Ω
1 - 2 1 MΩ or more
  • Rear seat remote right (window lock ON)
Terminal No. Inspection conditions Standard
1 - 2 OFF Less than 1 Ω
7 - 16 1 MΩ or more
1 - 16 Manual UP Less than 1 Ω
1 - 2
2 - 7
1 MΩ or more
2 - 16 Manual DOWN Less than 1 Ω
1 - 2
1 - 7
1 MΩ or more
  • Rear seat remote left (window lock OFF)
Terminal No. Inspection conditions Standard
9 - 7
8 - 7
OFF Less than 1 Ω
16 - 7 1 MΩ or more
16 - 9
8 - 7
Manual UP Less than 1 Ω
8 - 9 1 MΩ or more
16 - 8
9 - 7
Manual DOWN Less than 1 Ω
8 - 9 1 MΩ or more
  • Rear seat remote left (window lock ON)
Terminal No. Inspection conditions Standard
9 - 8 OFF Less than 1 Ω
16 - 7 1 MΩ or more
16 - 9 Manual UP Less than 1 Ω
8 - 7
9 - 8
1 MΩ or more
16 - 8 Manual DOWN Less than 1 Ω
9 - 8
9 - 7
1 MΩ or more
  • Except for base grade (model with telematics)
  • Driver's seat main
Terminal No. Inspection conditions Standard
12 - 11 OFF Less than 1 Ω
7 - 11
7 - 12
1 MΩ or more
12 - 7 Manual UP Less than 1 Ω
7 - 11
12 - 11
1 MΩ or more
11 - 7 Manual DOWN Less than 1 Ω
7 - 12
11 - 12
1 MΩ or more
  1. If the inspection result is not within the standard, replace the switch power window main.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.