Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Subaru Crosstrek Base, Automatic CVT TransFACTORY OEM SERVICE PROCEDURE
Vehicle Dynamics Control (VDC) System: General Description: Specification
- Impreza model
| Item | Specification or identification | |||
|---|---|---|---|---|
| ABS wheel speed sensor | ABS wheel speed sensor gap (for reference) | Front | 0.62 - 1.58 mm (0.02 - 0.062 in) |
|
| Rear | 0.47 - 1.73 mm (0.02 - 0.068 in) |
|||
| Identifications of harness (symbol) | Front | RH | K1 | |
| LH | K2 | |||
| Rear | RH | K5 | ||
| LH | K6 | |||
| VDCCM & H/U identification | Models without EyeSight | HL | ||
| Models with EyeSight | HM | |||
- Crosstrek model (except for hybrid)
| Item | Specification or identification | |||
|---|---|---|---|---|
| ABS wheel speed sensor | ABS wheel speed sensor gap (for reference) | Front | 0.62 - 1.58 mm (0.02 - 0.062 in) |
|
| Rear | 0.47 - 1.73 mm (0.02 - 0.068 in) |
|||
| Identifications of harness (symbol) | Front | RH | K3 | |
| LH | K4 | |||
| Rear | RH | K7 | ||
| LH | K8 | |||
| VDCCM & H/U identification | Models without EyeSight | HD | ||
| Models with EyeSight | HA | |||
- Crosstrek hybrid model
| Item | Specification or identification | |||
|---|---|---|---|---|
| ABS wheel speed sensor | ABS wheel speed sensor gap (for reference) | Front | 0.62 - 1.58 mm (0.02 - 0.062 in) |
|
| Rear | 0.6 - 1.59 mm (0.02 - 0.063 in) |
|||
| Identifications of harness | Front | RH | K3 | |
| LH | K4 | |||
| Rear | RH | K7 | ||
| LH | K8 | |||
| VDCCM & H/U identification | HK | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
