Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Brake Operation
- Drive in "8th speed of manual mode" [90 - 100 km/h (56 - 62 MPH)], and shift down from 8th to 7th.
Check if the indicator of combination meter switches "8" → "7", and the engine braking applies.
- Drive in "7th speed of manual mode" [80 - 90 km/h (50 - 56 MPH)], and shift down from 7th to 6th.
Check if the indicator of combination meter switches "7" → "6", and the engine braking applies.
- Drive in "6th speed of manual mode" [70 - 80 km/h (43 - 50 MPH)], and shift down from 6th to 5th.
Check if the indicator of combination meter switches "6" → "5", and the engine braking applies.
- Drive in "5th speed of manual mode" [60 - 70 km/h (37 - 43 MPH)], and shift down from 5th to 4th.
Check if the indicator of combination meter switches "5" → "4", and the engine braking applies.
- Drive in "4th speed of manual mode" [50 - 60 km/h (31 - 37 MPH)], and shift down from 4th to 3rd.
Check if the indicator of combination meter switches "4" → "3", and the engine braking applies.
- Drive in "3rd speed of manual mode" [30 - 40 km/h (19 - 25 MPH)], and shift down from 3rd to 2nd.
Check if the indicator of combination meter switches "3" → "2", and the engine braking applies.
- Drive in "2nd speed of manual mode" [20 - 30 km/h (12 - 19 MPH)], and shift down from 2nd to 1st.
Check if the indicator of combination meter switches "2" → "1", and the engine braking applies.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.