Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Subaru Ascent BaseFACTORY OEM SERVICE PROCEDURE
General Information & Specifications: Specifications: Ascent: Electrical
| Model | 2.4 L DOHC turbo | |||
|---|---|---|---|---|
| Ignition timing | BTDC/{r/min} | 0°±10°/700 | ||
| Spark plug | Manufacturer and type | NGK: SILKFR8A6 | ||
| Generator | Voltage and output | 12 V - 190 A | ||
| Battery | Type | 75D23L | ||
| Nominal capacity | 5HR: 52 Ah [25°C (77°F)] | |||
| Nominal voltage | 12 V | |||
| CCA | 530 A | |||
| BCI group number(1) | 35 | |||
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.