2021 Subaru Ascent BaseFACTORY OEM SERVICE PROCEDURE

Multi Function Display (MFD)

  1. Check that the Multi-Function Display (MFD) function operates normally.
  2. After inspection, clear the memory.
    CAUTION: If the delivery mode fuse is removed, the DTC related to the MFD is recorded. Be sure to clear the memory after installing the delivery mode fuse.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.