2021 Subaru Ascent BaseFACTORY OEM SERVICE PROCEDURE

Exhaust System: Muffler: Removal

CAUTION: Vehicle components are extremely hot immediately after driving. Be wary of receiving burns from heated parts.
  1. Disconnect the rear exhaust pipe and muffler.
    CAUTION: Be careful not to let the muffler contact the rear bumper.
    G13199077Courtesy of SUBARU OF AMERICA, INC.
  2. Apply a coat of spray type lubricant to the mating area of cushion rubber, and remove the muffler.
    G13199078Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the rear exhaust cover.
NOTE: Remove if necessary.
G13199079Courtesy of SUBARU OF AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.