2020 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE

Inspection Mode Ad

DTC Description & trouble part Condition Number of driving cycles on the detecting condition
P26A3 ENGINE COOLANT BYPASS VALVE "A" RANGE/PERFORMANCE Battery voltage: 10.9 V or more [Engine Coolant Temperature 1]: 90Β°C (194Β°F) or more 2
  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. Using the Subaru Select Monitor, perform the clear memory of [Engine Control System]. Refer to COMMON (DIAG)>CLEAR MEMORY .
  3. Turn the blower fan switch to OFF.
  4. Start the engine and let it idle.
  5. Turn the blower fan switch to ON and wait for at least 10 seconds.
  6. Turn the blower fan switch to OFF and wait for at least 10 seconds.
  7. Read the temporary code using the Subaru Select Monitor or general scan tool. Refer to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.