Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, input the target vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select the corresponding system and select [Enter].
On [Select Function] screen, select [DTC].
NOTE:
- For detailed operation procedures, refer to "Help" of application.
- Sub screen may appear in the system selection display. In that case, select appropriate items in accordance with the contents of the display.
- Current malfunction is a diagnostic code displayed when the system is judging the current malfunction. However, if a DTC is recorded due to poor contact etc., the code remains displayed as current malfunction during the drive cycle even after the poor contact has resolved.
- Past malfunction is a diagnostic code recorded when the current malfunction is not occurring but the system has detected a malfunction in the past. When the current malfunction is recorded, it is also recorded to the past malfunction at the same time.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Diagnostic Trouble Code (DTC): Operation