Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE
Data Monitor: List
| Item | Contents | Standard/Unit | Note |
|---|---|---|---|
| Trip Count [count] | Record display the number of turning the ignition switch to ON | Time | Time stamp information. Refer to COMMON (DIAG)>TIME STAMP . |
| Count | - | - | |
| Time Count [msec] | Record display the time elapsed after turning the ignition switch to ON | ms | |
| time(ms) | Time elapsed after the malfunction has determined for the freeze frame | ms | - |
| ECU Voltage | Driver Monitoring Unit power supply voltage | V | - |
| ECU Temperature | Driver Monitoring Unit board temperature | °C | - |
| Camera Temperature | Camera board temperature | °C | - |
| DMS Current Mode | Driver Monitoring System operation mode | OFF: Driver Monitoring System OFF Switch OFF ON: Driver Monitoring System OFF Switch ON |
- |
| DMS Recognizing ID | Driver Monitoring System recognition ID | Default: Default ID 1: ID 1 recognition ID 2: ID 2 recognition ID 3: ID 3 recognition ID 4: ID 4 recognition ID 5: ID 5 recognition Identifying: ID recognition in-progress |
- |
| DMS Recognition Status | Driver Monitoring System ID recognition status | Undefined: When the personal recognition is incomplete Defined: When the personal recognition is completed |
- |
| DMS Recognition ON/OFF Status | Driver Monitoring System personal recognition ON/OFF status | Recognition OFF: When the personal recognition function is OFF Recognition ON: When the personal recognition function is ON |
- |
| DMS Decision Sensitivity Setting | Driver Monitoring System inattention detection sensitivity setting | Default: Default Insensitive: Sensitivity low More insensitive: Sensitivity even lower |
- |
| DMS Distraction Detection Status | Driver Monitoring System inattention detection status | Not detect: Inattention not detected Detect: Inattention detection in-progress |
- |
| DMS Drowsiness Detection Status | Driver Monitoring System closed eyes detection status | Not detect: Closed eyes detection status Detect: Closed eyes detection in-progress |
- |
| DMS Sleepiness Detection Status | Driver Monitoring System drowsiness detection status | No drowsiness: No drowsiness detection status Light drowsiness: Light drowsiness detection status Strong drowsiness: Strong drowsiness detection status |
- |
| DMS Face Direction Detection Status | Driver Monitoring System face direction detection status | Front: Face direction front detection status Right: Face direction right detection status Left: Face direction left detection status Up: Face direction upward detection status Down: Face direction downward detection status |
- |
| Shift status, reverse (AT/CVT) | Shift position reverse information (AT/CVT) | D: Shift position D N: Shift position N R: Shift position R P: Shift position P L: Shift position L |
- |
| Vehicle Speed | Vehicle speed information | km/h | - |
| Steering Input | Steering angle | ° | - |
| Driver Side Door Status | Driver's door information | Door open: Driver's door open status Door close: Driver's door close status |
- |
| Turn Signal Status | Turn signal information | Not operation: Turn signal not in operation Operation: Turn signal operation in-progress |
- |
| EPB Status | EPB operation information | Release: EPB release status Operation: EPB operation status In progress: EPB operation in-progress |
- |
| DMS ID 1 Regist Status | Driver Monitoring System ID 1 registration status | Not register: ID not registered Registered: ID registered |
- |
| DMS ID 1 ON/OFF Status | Driver Monitoring System ID 1 ON/OFF status | OFF: ID1 OFF ON: ID1 ON |
- |
| DMS ID 2 Regist Status | Driver Monitoring System ID 2 registration status | Not register: ID not registered Registered: ID registered |
- |
| DMS ID 2 ON/OFF Status | Driver Monitoring System ID 2 ON/OFF status | OFF: ID2 OFF ON: ID2 ON |
- |
| DMS ID 3 Regist Status | Driver Monitoring System ID 3 registration status | Not register: ID not registered Registered: ID registered |
- |
| DMS ID 3 ON/OFF Status | Driver Monitoring System ID 3 ON/OFF status | OFF: ID3 OFF ON: ID3 ON |
- |
| DMS ID 4 Regist Status | Driver Monitoring System ID 4 registration status | Not register: ID not registered Registered: ID registered |
- |
| DMS ID 4 ON/OFF Status | Driver Monitoring System ID 4 ON/OFF status | OFF: ID4 OFF ON: ID4 ON |
- |
| DMS ID 5 Regist Status | Driver Monitoring System ID 5 registration status | Not register: ID not registered Registered: ID registered |
- |
| DMS ID 5 ON/OFF Status | Driver Monitoring System ID 5 ON/OFF status | OFF: ID5 OFF ON: ID5 ON |
- |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.