Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Subaru Outback BaseFACTORY OEM SERVICE PROCEDURE
Freeze Frame Data: List
| Item | Contents | Standard/Unit | Note |
|---|---|---|---|
| Trip Count [count] | Number of IG ON judged by the body integrated unit (CAN communication data) Refer to COMMON (DIAG)>TIME STAMP . | times | - |
| Count | Number of IG ON, synchronous/asynchronous identification information of the elapsed time after IG ON Refer to COMMON (DIAG)>TIME STAMP . | - | - |
| Time Count [msec] | Elapsed time (detail) after IG ON calculated by the cockpit control system Refer to COMMON (DIAG)>TIME STAMP . | ms | - |
| ACC Power connection state | ACC power supply connection status | ON: When ACC is ON OFF: Other |
- |
| IGN Power connection state | IGN power supply connection status | ON: When connected OFF: When not connected |
- |
| Reverse connection state | Reverse signal connection status | ON: When connected OFF: When not connected |
- |
| SPEED signal connection state | Vehicle speed signal open circuit status | ON: When connected OFF: When not connected |
- |
| PKB connection state | Parking brake signal connection status | ON: When connected OFF: When not connected |
- |
| Illumi connection state | Illumination signal connection status | ON: When the light illuminates OFF: Other |
- |
| XM ant connection state | Antenna (XM) connection status | ON: When connected OFF: When not connected |
- |
| GPS ant connection state | Antenna (GPS) connection status | ON: When connected OFF: When not connected |
Only for models with navigation |
| MIC connection state | Microphone connection status | ON: When connected OFF: When not connected |
- |
| Steering switch connection state | Steering switch connection status | ON: When the steering switch is pressed OFF: Other |
- |
| Rear camera connection state | Rear camera connection status | ON: When reverse is ON OFF: When reverse is OFF |
With rear camera connection |
| USB1 connection state | USB1 connection status | ON: When connected OFF: When not connected |
- |
| CAN connection state | CAN connection status | ON: With no DTC U-CODE OFF: Other |
- |
| Battery Voltage | Battery voltage | 0 - 21.50 V | Only for models with navigation |
| Speed | Speed | 0 - 300 | Only for models with navigation |
| BATT BackUp Voltage | BATT BackUp voltage | - | - |
| GPS Received Number | GPS Reception number | 0 - 255 | Only for models with navigation |
| Global Positioning System Level | GPS positioning level | 0 - 255 | Only for models with navigation |
| Time and Date Settings: Year | Current date and time: Year | 2000 - 2255 Year | Only for models with navigation |
| Time and Date Settings: Month | Current date and time: Month | 0 - 255 Month | Only for models with navigation |
| Time and Date Settings: Date | Current date and time: Day | 0 - 255 day | Only for models with navigation |
| Time and Date Settings: Hour | Current date and time: Hour | 0 - 255 Hour | Only for models with navigation |
| Time and Date Settings: Minute | Current date and time: Minute | 0 - 255 min | Only for models with navigation |
| Time and Date Settings: Second | Current date and time: Second | 0 - 255 sec. | Only for models with navigation |
| MVS camera connection state | MVS camera connection status | ON: When connected OFF: When not connected |
- |
| CID connection state | CID connection status | ON: When connected OFF: When not connected |
- |
| METER connection state | METER connection status | ON: When connected OFF: When not connected |
- |
| USB3 connection state | USB3 connection status | ON: When connected OFF: When not connected |
- |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.