2020 Subaru Forester BaseFACTORY OEM SERVICE PROCEDURE

Inspection Mode F

DTC Item Condition
P0708 TRANSMISSION RANGE SENSOR "A" CIRCUIT HIGH -
P1603 ENGINE STALL HISTORY -

Diagnostic procedure:Β 

  1. Start the engine.
  2. Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S)Β .
  3. Depress the brake pedal and move the select lever to each range at an interval of five seconds.
    NOTE: Move the select lever in the following order: "P" β†’ "R" β†’ "N" β†’ "D".
  4. Drive for three seconds at 16 km/h (10 MPH).
    NOTE: Drive in "D" range and "R" range.
  5. Check the readiness code using Subaru Select Monitor, confirm that the diagnosis is completed, and end the procedure. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S)Β .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.