Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Lubrication System: General Description: Specification
| Lubrication method | Forced lubrication type | ||||
| Oil pump | Pump type | Trochoid type | |||
| Number of teeth | pcs. | Inner rotor | 10 | ||
| Outer rotor | 11 | ||||
| Outer rotor diameter x Thickness | mm (in) | 71.4x 14 (2.81x0.55) | |||
| Performance (Oil temperature 120°C (248°F)) | 600 r/min | Discharge pressure | kPa (kg/cm2 , psi) | 34 (0.3, 4.9) | |
| Discharge rate | L (US qt, Imp qt)/min | 5.8 (6.1, 5.1) or more | |||
| 6, 000 r/min | Discharge pressure | kPa (kg/cm2 , psi) | 298 (3.0, 43.2) | ||
| Discharge rate | L (US qt, Imp qt)/min | 46.6 (49.3, 41.0) or more | |||
| Relief valve working pressure (2-step relief) | 1st opening pressure | kPa (kg/cm2 , psi) | 150 (1.5, 21.7) | ||
| Main opening pressure | kPa (kg/cm2 , psi) | 700 (7.1, 101.5) | |||
| Oil filter | Filter type | Full-flow filter type | |||
| Filtration area | cm2 (sq in) | 1, 100 (171) | |||
| By-pass valve opening pressure | kPa (kg/cm2 , psi) | 160 (1.6, 23.2) | |||
| Outer diameter x Width | mm (in) | 68 x 85 (2.68x3.35) | |||
| Installation screw specifications | M 20x1.5 | ||||
| Oil pressure switch | Type | Immersed contact point type | |||
| Operating voltage | V | 12 | |||
| Warning light operating pressure | kPa (kg/cm2 , psi) | 14.7 (0.1, 2.1) | |||
| Proof pressure | kPa (kg/cm2 , psi) | 981 (10.0, 142.2) | |||
| Engine oil | Total capacity (at overhaul) | L (US qt, Imp qt) | 5.1 (5.4, 4.5) | ||
| When replacing engine oil and oil filter | L (US qt, Imp qt) | 4.2 (4.4, 3.7) | |||
| When replacing engine oil only | L (US qt, Imp qt) | 4.0 (4.2, 3.5) | |||
Engine oil:
Refer to RECOMMENDED MATERIALS>GREASE .
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.