2019 Subaru WRX BaseFACTORY OEM SERVICE PROCEDURE

VDC Control Module And Hydraulic Control Unit (VDCCM & H/U)

  • Models without EyeSight
    Fig 1: VDC Control Module And Hydraulic Control Unit Compnents (With Torque Specifications) (Models Without Eyesight)
    G13260233Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: N.m (kgf-m, ft-lb) 

    T1: 7.5 (0.8, 5.5) 

    T2: 15 (1.5, 11.1) 

    T3: 19 (1.9, 14) 

    T4: 33 (3.4, 24.3) 

  • Models with EyeSight
    Fig 2: VDC Control Module And Hydraulic Control Unit Components (With Torque Specifications) (Models With Eyesight)
    G13260234Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: N.m (kgf-m, ft-lb) 

    T1: 7.5 (0.8, 5.5) 

    T2: 15 (1.5, 11.1) 

    T3: 19 (1.9, 14) 

    T4: 33 (3.4, 24.3) 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.