Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Diagnostic Method
Diagnosis 1
Judge as NG when the following conditions are established.
| Malfunction Criteria | Threshold Value |
|---|---|
| Actual voltage | > 0.01953125V |
time needed for diagnosis :200ms
Diagnosis 2
Judge as NG when the following conditions are established.
| Malfunction Criteria | Threshold Value |
|---|---|
| Actual voltage | > 4.979248047V |
time needed for diagnosis :200ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.