Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Subaru Crosstrek Base, Automatic CVT TransFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | Gas | 1.10 LBS. | 0.49 KG | HFC-134 | S | ||
| Automatic Transmission Fluid | Gas | 11.30 QTS. | 10.69 L | SUBARU CVT Oil for Lineartronic II | S | ||
| Brake Fluid | N/A | N/A | FMVSS No. 116 DOT 3 or DOT 4 Brake Fluid | S | |||
| Differential Gear Oil | Front | 1.40 QTS. | 1.32 L | API - GL-5, SAE 75W-90 gear oil | S | ||
| Differential Gear Oil | Rear | 0.80 QTS. | 0.75 L | API - GL-5, SAE 75W-90 gear oil | S | ||
| Engine Coolant | Automatic CVT Trans | 8.20 QTS. | 7.76 L | SUBARU Super Coolant | S | ||
| Engine Oil | Total Capacity | 5.60 QTS. | 5.29 L | ILSAC GF-4 or GF-5, API - SN or SM, 0W-20 Synthetic Oil | If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. | S | |
| Engine Oil | w/Filter | 4.70 QTS. | 4.44 L | ILSAC GF-4 or GF-5, API - SN or SM, 0W-20 Synthetic Oil | If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. | S | |
| Engine Oil | w/o Filter | 4.40 QTS. | 4.16 L | ILSAC GF-4 or GF-5, API - SN or SM, 0W-20 Synthetic Oil | If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. | S | |
| Fuel Tank | Gas | 16.60 GALS. | 62.83 L | S | |||
| Manual Transmission Fluid | 3.50 QTS. | 3.31 L | SUBARU Extra MT | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.