Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Diagnostic Method
Judge as NG when one of the following conditions is established.
| Malfunction Criteria | Threshold Value |
|---|---|
| (1) Absolute value monitoring | |
| A/D voltages for monitoring or A/D voltages for monitoring |
> 2.7 V < 2.5 V |
| (2) A/D/changes monitoring | |
| |(Buffer voltage of AD changes - base voltage of A/D changes)| | > 0.029296875V |
| (3) A/D voltages for monitoring | Did not change |
| (4) |(Throttle position sensor (Main) - (amplified throttle position sensor (Main))/4)| | β₯ 3Β° |
| (5) (Amplified throttle position sensor (Main))/4 | β₯ 23.8235Β° |
Time needed for diagnosis:Β
(1): 200ms
(2): 200ms
(3): 200ms
(4): 24ms
(5): 24ms
Malfunction indicator light illumination:Β Illuminates as soon as a malfunction occurs.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
