2018 Subaru WRX STIFACTORY OEM SERVICE PROCEDURE

Pulsation Damper Assembly: Assembly

Install the fuel pipe gasket and pulsation damper to the fuel by-pass pipe.

NOTE: Use a new fuel pipe gasket.

Tightening Torque:

21.6 N.m (2.2 kgf-m, 15.9 ft-lb)

G12437457
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.