2018 Subaru BRZ Limited, Automatic TransFACTORY OEM SERVICE PROCEDURE

Unit Inspection

G12586405Courtesy of SUBARU OF AMERICA, INC.
  1. Inspection of intake air flow meter SUB-ASSY
    1. Use a working lamp, visually check the platinum filament (heater) portion of the intake air flow meter SUB-ASSY for foreign matter.

      Criteria: No foreign matter 

      NOTE: If there is a foreign matter on the platinum filament (heater), replace the intake air flow meter SUB-ASSY.
      G12586406Courtesy of SUBARU OF AMERICA, INC.
    2. Inspection of intake temperature sensor resistance
      1. Measure the resistance between the terminals.
STANDARD VALUE RESISTANCE SPECIFICATION

Inspection terminals Inspection conditions Standard value
1 - 2 -20°C {-4°F} 13.6 to 18.4k Ω
20°C {68°F} 2.21 to 2.69k Ω
60°C {140°F} 0.49 to 0.67k Ω
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.