2017 Subaru WRX BaseFACTORY OEM SERVICE PROCEDURE

Clutch Assembly

  • STI model
Fig 1: Exploded View Of Clutch Assembly With Torque Specification (STI Model)
G11578830Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: N.m (kgf-m, ft-lb) 

T1: 16 (1.6, 11.8) 

T2: 48 (4.9, 35.4) 

T3: 75 (7.6, 55.3) 

  • Except for STI model
Fig 2: Exploded View Of Clutch Assembly With Torque Specification (Except For STI Model)
G11578831Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: N.m (kgf-m, ft-lb) 

T1: 16 (1.6, 11.8) 

T2: <Ref. to  EXCEPT FOR STI MODEL  , INSTALLATION, Flywheel.> 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.