Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Intake Manifold: Assembly
- Apply liquid gasket to the nipple threads, and install the nipple to the intake manifold.
Liquid gasket:
THREE BOND 1105 (Part No. 004403010) or equivalent
Tightening torque:
T1: 17 N.m (1.7 kgf-m, 12.5 ft-lb)
T2: 25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the tumble generator valve assembly onto intake manifold.NOTE: Use a new gasket.
Tightening torque:
8.3 N.m (0.8 kgf-m, 6.1 ft-lb)
- Install the air intake duct to the intake manifold.
Tightening torque:
17 N.m (1.7 kgf-m, 12.5 ft-lb)
- Install the fuel pipe assembly to the intake manifold.
Tightening torque:
6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
- Install the fuel injector pipe LH and connect the LH side fuel hose to the fuel injector pipe LH. < Ref. to
CONNECTING FUEL DELIVERY HOSE, FUEL RETURN HOSE AND FUEL HOSE , INSTALLATION, Fuel Delivery, Return and Evaporation Lines. >NOTE: Use a new fuel hose.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.