Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Subaru WRX BaseFACTORY OEM SERVICE PROCEDURE
M/T Clutch System: General Description: Specification
| Model | STI | Except for STI | |||
| Transmission type | 6MT | 6MT | |||
| Clutch cover | Type | Pull type | Push type | ||
| Diaphragm set load | N (kgf, lbf) | 9120 (930, 2051) | 7450 (760, 1675) | ||
| Clutch disc | Facing material | Woven (non-asbestos) | |||
| O.D. X I.D. X Thickness | mm (in) | Clutch cover side | 240 X 160 X 3.5 (9.45 X 6.30 X 0.138) | 230 X 155 X 3.5 (9.06 X 6.10 X 0.138) | |
| Flywheel side | 240 X 160 X 3.2 (9.45 X 6.30 X 0.126) | 230 X 155 X 3.2 (9.06 X 6.10 X 0.126) | |||
| Spline outer diameter | mm (in) | 25.2 (0.992), (number of teeth: 24) | |||
| Depth of rivet head | mm (in) | Clutch cover side | 1.65 - 2.25 (0.065 - 0.089) | ||
| Flywheel side | 1.35 - 1.95 (0.053 - 0.077) | ||||
| Limit of sinking | 0.8 (0.031) | ||||
| Deflection limit | mm (in) | 0.7 (0.028) at R = 115 (4.53) | 0.7 (0.028) at R = 110 (4.33) | ||
| Release bearing | Grease-packed self-aligning | ||||
| Clutch pedal | Full stroke | mm (in) | 130 - 135 (5.12 - 5.31) | 135 - 140 (5.31 - 5.51) | |
| Free play | mm (in) | 5 - 11 (0.20 - 0.43) | |||
| Flywheel | Type | Conventional | Flexible | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.