Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Subaru Outback 2.5iFACTORY OEM SERVICE PROCEDURE
Engine Controls (H4DO) (Diagnostics) (2 Of 4)
- DTC P015A A/F/O2 Sensor Delayed Response - Rich To Lean Bank 1 Sensor 1
- DTC P015B A/F/O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1
- DTC P0171 System Too Lean Bank 1
- DTC P0172 System Too Rich Bank 1
- DTC P0196 Engine Oil Temperature Sensor "A" Range/Performance
- DTC P0197 Engine Oil Temperature Sensor "A" Circuit Low
- DTC P0198 Engine Oil Temperature Sensor "A" Circuit High
- DTC P0201 Cylinder 1 Injector "A" Circuit
- DTC P0202 Cylinder 2 Injector "A" Circuit
- DTC P0203 Cylinder 3 Injector "A" Circuit
- DTC P0204 Cylinder 4 Injector "A" Circuit
- DTC P0222 Throttle/Pedal Position Sensor/Switch "B" Circuit Low
- DTC P0223 Throttle/Pedal Position Sensor/Switch "B" Circuit High
- DTC P0300 Random/Multiple Cylinder Misfire Detected
- DTC P0301 Cylinder 1 Misfire Detected
- DTC P0302 Cylinder 2 Misfire Detected
- DTC P0303 Cylinder 3 Misfire Detected
- DTC P0304 Cylinder 4 Misfire Detected
- DTC P0327 Knock/Combustion Vibration Sensor 1 Circuit Low Bank 1 Or Single Sensor
- DTC P0328 Knock/Combustion Vibration Sensor 1 Circuit High Bank 1 Or Single Sensor
- DTC P0335 Crankshaft Position Sensor "A" Circuit
- DTC P0336 Crankshaft Position Sensor "A" Circuit Range/Performance
- DTC P0340 Camshaft Position Sensor "A" Circuit Bank 1 Or Single Sensor
- DTC P0341 Camshaft Position Sensor "A" Circuit Range/Performance Bank 1 Or Single Sensor
- DTC P0345 Camshaft Position Sensor "A" Circuit Bank 2
- DTC P0346 Camshaft Position Sensor "A" Circuit Range/Performance Bank 2
- DTC P0351 Ignition Coil "A" Primary Control Circuit/Open
- DTC P0352 Ignition Coil "B" Primary Control Circuit/Open
- DTC P0353 Ignition Coil "C" Primary Control Circuit/Open
- DTC P0354 Ignition Coil "D" Primary Control Circuit/Open
- DTC P0400 EGR "A" Flow
- DTC P0420 Catalyst System Efficiency Below Threshold Bank 1
- DTC P0441 EVAP System (CPC) Incorrect Purge Flow
- DTC P0451 EVAP System (CPC) Pressure Sensor/Switch Circuit Range/Performance
- DTC P0452 EVAP System (CPC) Pressure Sensor/Switch Circuit Low
- DTC P0453 EVAP System (CPC) Pressure Sensor/Switch Circuit High
- DTC P0455 EVAP System (CPC) Leak Detected (Large Leak)
- DTC P0456 EVAP System (CPC) Leak Detected (Very Small Leak)
- DTC P0458 EVAP System (CPC) Purge Control Valve "A" Circuit Low
- DTC P0459 EVAP System (CPC) Purge Control Valve "A" Circuit High
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.