2016 Subaru Outback 2.5iFACTORY OEM SERVICE PROCEDURE

SUBARU Select Monitor

  1. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODEΒ . >
  2. Read the diagnostic trouble code (DTC) and check that no DTC is displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC)Β . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis using "Diagnostic Procedure with Diagnostic Trouble Code (DTC)". < Ref. to List of Diagnostic Trouble Code (DTC)Β . > After solving the DTC, repeat from step Β 1).
  3. Start the engine, and run the engine at idle for 10 seconds or more.
  4. Read the diagnostic trouble code (DTC) and check the DTC. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC)Β . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis using "Diagnostic Procedure with Diagnostic Trouble Code (DTC)". < Ref. to List of Diagnostic Trouble Code (DTC)Β . > After solving the DTC, repeat from step Β 1).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.