2016 Subaru BRZ Series.HyperBlueFACTORY OEM SERVICE PROCEDURE

Symptom Table

NOTE:
  • If normal operation is not possible in a specific place or time period, check that it is not being affected by any external electromagnetic waves.
  • If you experience problems after installing equipment such as new parts installed by the dealer, please confirm that the part is not affecting the vehicle by emitting electromagnetic waves.
Symptoms Inspection items Reference
The steering lock does not operate. Refer to the "STEERING LOCK DOES NOT OPERATE " symptom-specific flow chart.  
The steering lock cannot be released (cannot start the engine) Refer to the "STEERING LOCK CANNOT BE RELEASED (CANNOT START THE ENGINE) " symptom-specific flow chart.  
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.