Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Subaru XV Crosstrek BaseFACTORY OEM SERVICE PROCEDURE
Fuel Injection System (Except Hybrid): General Description: Specification
| Fuel tank | Capacity | Except for XV model | 55 L (14.5 US gal, 12.1 Imp gal) |
| XV model | 60 L (15.9 US gal, 13.2 Imp gal) | ||
| Location | Under rear seat | ||
| Fuel pump | Type | Impeller | |
| Shutoff discharge pressure | 677 kPa (6.9 kg/cm2 , 98.2 psi) or less | ||
| Discharge rate | 85 L (22.5 US gal, 18.7 Imp gal)/h or more [12 V at 300 kPa (3.06 kg/cm2 , 43.5 psi)] | ||
| Fuel filter | In-tank type | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.