2015 Subaru WRX BaseFACTORY OEM SERVICE PROCEDURE

Front Disc Brake

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Item Specification
Size 16-inch 17-inch
Type Floating 2-POT piston type
Ventilated disc
Effective cylinder diameter mm (in) 42.8 X 2 (1.685 X 2)
Pad size (Length X Width X Thickness) mm (in) 130.0 X 53.5 X 11.0 (5.118 X 2.106 X 0.433)
Pad thickness mm (in) Standard 11 (0.43)
Limit 1.5 (0.059)
Effective disc diameter mm (in) 244 (4.61) 261 (10.28)
Rotor size (Thickness X O.D.) mm (in) 28 X 294 (1.10 X 11.57) 30 X 316 (1.18 X 12.44)
Disc thickness mm (in) Standard 28 (1.10) 30 (1.18)
Limit 26 (1.02) 28 (1.10)
Disc runout mm (in) Standard -
Limit 0.05 (0.0020)
Clearance adjustment Automatic adjustment
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.