2015 Subaru Outback 3.6R LimitedFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil N/A N/A See Underhood Decal. S
Air Cond Refrigerant 0.85 LBS. 0.38 KG HFC-134a S
Automatic Transmission Fluid 3.6L Eng N/A N/A SUBARU High Torque CVT Fluid Fluid Capacity is between: 13.20 - 13.70 qts. S
Brake Fluid N/A N/A FMVSS No. 116 DOT 3 or DOT 4 Brake Fluid S
Differential Gear Oil 3.6L Eng Front N/A N/A API - GL-5, SAE 75W-90 gear oil Fluid Capacity is between: 1.40 - 1.60 qts. S
Differential Gear Oil Rear 0.80 QTS. 0.75 L API - GL-5, SAE 75W-90 gear oil S
Engine Coolant 3.6L Eng 7.40 QTS. 7 L SUBARU Super Coolant S
Engine Oil 3.6L Eng Overhaul 8.20 QTS. 7.76 L ILSAC GF-4 or GF-5, API - SAE 5W-30 Conventional Motor Oil Your vehicle is designed to use 5W-30 conventional motor oil, however 5W-30 synthetic may be used for optimum engine performance. If you do choose to use synthetic oil, SUBARU recommends that you continue using synthetic for the life of your vehicle. S
Engine Oil 3.6L Eng w/Filter 6.90 QTS. 6.52 L ILSAC GF-4 or GF-5, API - SAE 5W-30 Conventional Motor Oil Your vehicle is designed to use 5W-30 conventional motor oil, however 5W-30 synthetic may be used for optimum engine performance. If you do choose to use synthetic oil, SUBARU recommends that you continue using synthetic for the life of your vehicle. S
Engine Oil 3.6L Eng w/o Filter 6.70 QTS. 6.34 L ILSAC GF-4 or GF-5, API - SAE 5W-30 Conventional Motor Oil Your vehicle is designed to use 5W-30 conventional motor oil, however 5W-30 synthetic may be used for optimum engine performance. If you do choose to use synthetic oil, SUBARU recommends that you continue using synthetic for the life of your vehicle. S
Fuel Tank 18.50 GALS. 70.03 L S
Windshield Washer Fluid N/A N/A Windshield Washer Fluid S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.