Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Subaru Outback 2.5iFACTORY OEM SERVICE PROCEDURE
LH Side
- Install the spark plugs using a spark plug socket.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Install the ignition coil.CAUTION: Degrease the ignition coil fixing portion and the ignition coil mounting bolt.
Tightening torque:
8.0 N.m (0.8 kgf-m, 5.9 ft-lb)
- Connect the connector to the ignition coil.
- Install the battery. <Ref. to INSTALLATION , Battery.>
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.