2014 Subaru TribecaFACTORY OEM SERVICE PROCEDURE

RH Side

  1. Remove the collector cover.
  2. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  3. Disconnect the ground cable from battery.
  4. Open the fuel filler lid and remove the fuel filler cap.
  5. Disconnect the brake booster vacuum hose from the intake manifold.
    Fig 1: Identifying Brake Booster Vacuum Hose
    G08543837Courtesy of SUBARU OF AMERICA, INC.
  6. Loosen the clamp (A) which connects air intake chamber to throttle body.
  7. Loosen the clamp (B) which connects intake boot to air intake chamber.
  8. Remove the bolt (C) which secures air intake chamber and collector cover bracket to the stay.
    Fig 2: Identifying Air Intake Chamber Clamps And Bolt
    G08543838Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the air intake chamber, and move it to the left side wheel apron.
    Fig 3: Identifying Air Intake Chamber
    G08543839Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the air cleaner case and intake boot. < Ref. to REMOVAL , Air Cleaner Case. >
  11. Remove the feed hose from the fuel pipe protector RH.
    Fig 4: Locating Fuel Pipe Protector Mounting Bolt (RH)
    G07924398Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the fuel pipe protector RH.
    Fig 5: Locating Fuel Pipe Protector Bolts (RH)
    G07924399Courtesy of SUBARU OF AMERICA, INC.
  13. Disconnect the connector from fuel injector.
  14. Remove the bolt which holds fuel injector pipe onto cylinder head.
    Fig 6: Locating Fuel Injector Pipe To Cylinder Head Mounting Bolts (RH)
    G07912261Courtesy of SUBARU OF AMERICA, INC.
  15. Remove the fuel injector while lifting up the fuel injector pipe.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.