Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014LEGACY 2.5I, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSSECURITY AND LOCKS - MECHANISM & FUNCTIONKEYLESS ENTRY SYSTEMFUNCTIONDOOR UNLOCKING (DRIVER'S DOOR)
2014 Subaru Legacy 2.5i, Automatic CVT Trans
Door Unlocking (Driver's Door)
2014 Subaru Legacy 2.5i, Automatic CVT TransSECTION Door Unlocking (Driver's Door)
- Push the transmitter's UNLOCK button once.
- The driver's door is unlocked and the interior light turns ON (when the interior light switch is set at the DOOR position).NOTE: The interior light illuminates for 15 seconds and then fades out. (However, if a door locking procedure is performed again during this period, the lights will go out immediately.) The extinguishing time can be changed with the customizing function.
- Check that the buzzer sounds twice and the hazard warning lights flash twice.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.