Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Subaru TribecaFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | N/A | N/A | PAG 46 | See Underhood Decal. | S | ||
| Air Cond Refrigerant | 1.31 LBS. | 0.59 KG | HFC-134a | S | |||
| Automatic Transmission Fluid | 10.40 QTS. | 9.84 L | SUBARU Automatic Transmission Fluid. Alternative: IDEMITSU Automatic Transmission Fluid HP. | Use of any fluid other than the recommended fluid may cause transmission damage. | S | ||
| Brake Fluid | N/A | N/A | FMVSS No. 116 DOT 3 or DOT 4 Brake Fluid | S | |||
| Differential Gear Oil | Front | 1.50 QTS. | 1.41 L | API - GL-5, SAE 75W-90 gear oil | S | ||
| Differential Gear Oil | Rear | 0.80 QTS. | 0.75 L | API - GL-5, SAE 75W-90 gear oil | S | ||
| Engine Coolant | 8.00 QTS. | 7.57 L | SUBARU Super Coolant | S | |||
| Engine Oil | Total Capacity | 8.20 QTS. | 7.76 L | ILSAC GF-4 or GF-5, API - SN or SM, 5W-30 Synthetic Oil | S | ||
| Engine Oil | w/Filter | 6.90 QTS. | 6.52 L | ILSAC GF-4 or GF-5, API - SN or SM, 5W-30 Synthetic Oil | S | ||
| Engine Oil | w/o Filter | 6.70 QTS. | 6.34 L | ILSAC GF-4 or GF-5, API - SN or SM, 5W-30 Synthetic Oil | S | ||
| Fuel Tank | 16.90 GALS. | 63.97 L | S | ||||
| Power Steering Fluid | 1.00 QTS. | 0.94 L | SUBARU Automatic Transmission Fluid or Automatic Transmission Fluid DEXRON III | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.